Naming Conventions For Finishers (Commercial Naming And Naming In User Interfaces) - Canon Two-Knife Booklet Trimmer-A1 User Manual

Naming conventions for finishers (commercial naming and naming in User Interfaces)

Naming conventions for finishers (commercial naming and
naming in User Interfaces)
Hardware and hardware naming in User Interfaces
To improve the readability of texts in User Interfaces of operator panels and software,
the finishers are generally referred to by their function. The table below shows the naming
conventions for finishers (commercial product names and the way these are referred to
in User Interfaces).
Note:
In some cases, there is only 1 name for several modules. The reason is that a configuration
can only contain 1 of the available types of modules.
Conversion table for commercial names versus user-friendly names in User Interfaces
Commercial product name:
Finisher-AF1
Saddle Finisher-AF2
Puncher Unit-BP1/BQ1/BR1
Paper Folding Unit-F1
Document Insertion Unit-F1
High-Capacity Stacker-E1
Booklet Trimmer-D1
Two-Knife Trimmer-A1
Perfect Binder-C1
Duplex Color Image Reader Unit-D1
8 Chapter 1 - Preface
In UI, printer driver and software re-
ferred to as:
'Stacker/stapler'
'Stacker/stapler'
'Puncher'
'Folder'
'Inserter'
'Stacker'
'Trimmer'
'Trimmer'
'Perfect Binder'
'Scanner'
#