C-Response Data Packet Table - Canon RE-350 Control Interface Commands Manual

2.3 C-response Data Packet Table

C-response Description
Response without parameter
Read Zoom position
Status of Group A
Status of Group B
Status of Button
Status of WB control knob
Status of EXP control knob
Status of Detail control knob
Status of AWB result
Name of the Equipment
Version of ROM
System Error
Mode Error
Time out error
System error response
If the has a fatal error which it cannot recover from while performing a command from the
RE-350
will send this response and stop the current operation.
Mode error response
Depending on the mode, [O
case, the Mode error response will be sent to the PC.
For Example: If the
RE-350
give a Mode error response because in this mode such a command cannot be executed.
Time out error response
When the is given the command <
RE-350
but cannot finish the operation successfully in an expected period, this error is given.
-L ] or [O -L ], the RE-350 may not be able to execute some commands. In this
N INE FF INE
is in the [O -L ] Mode and the <Zoom Wide> command is issued, the
FF INE
> or <
OP AF
1 byte 2 byte
Header ID #
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
$A0 $8*
> from the and it tries to perform the command
OP AWB PC
3 byte 4 byte
Para(H)
Response
$00 $00
$10 $00
$20 $**
$21 $**
$30 $**
$40 $00
$41 $00
$42 $00
$43 $00
$48 $**
$49 $**
$F0 $00
$F0 $00
$F0 $00
, the
PC
RE-350
5 byte
Para(L)
$00
$**
$**
$00
$**
$**
$**
$**
$**
$**
$**
$00
$01
$02
RE-350
will
21