Removing The Cassette Holder; Removing The Encoder (Enc) Sensor Pcb - Brother LX-200 Service Manual

3.16.2

Removing the Cassette Holder

1. Release the two side hooks fastening the cassette holder.
2. Flex the rear face of the cassette holder inward to release the two lugs. Remove the
cassette holder from the bottom chassis.
3.16.3

Removing the Encoder (ENC) Sensor PCB

Remove the ENC sensor screw. Remove the ENC sensor assy.
Hooks
Bottom chassis
Fig. 3.16-2 Removing the Cassette Holder
Fig. 3.16-3 Removing the ENC Sensor PCB
3-38
Lug
Cassette holder
ENC sensor screw
ENC sensor assy