Setup Menu (Custom Tab) - Acer Digital camera 8.28 Mega pixels CCD sensor User Manual

Setup Menu (Custom tab)

1. Slide the mode switch to [
the mode dial to [
2. Select the [Custom] menu with the
button.
The [Custom] tab of the set-up menu
is displayed.
3. Select the desired [Custom] option item
/
with the buttons, and press the
SET button to enter its respective menu.
4. Select the desired setting with the
buttons, and press the SET button.
5. To exit from the set-up menu, change
the mode dial setting.
Date/Time
This sets the date and the time.
Refer to the section in this manual titled "Setting the Date and Time" for further details.
Sys. Reset
This returns all basic settings to the camera's default settings. Note that the
date and time setting will not be reset, however.
* Cancel / Execute
Language
This sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled "Choosing the OSD Language" for
further details.
Video Output
This sets video output standard of the camera so you may connect your camera
to video equipment.
* NTSC / PAL
System Info.
This displays the firmware version of the camera.
] and set
].
/
EN-53