Pre-Record; Time Lapse - Toshiba Clip Camcorder - Light Blue User Manual

32
Preview/Record Mode
Video setup

Pre-record

The Pre-record function ensures that you will not miss any critical recording
opportunities. The videos are recorded few seconds more before the Record button is
pressed.
1 In the Video Setting menu, select the Pre-
record icon and then press the OK (
button to enter its setting menu.
2 Use the Up/Down button to select ON or
OFF, and then press the OK (
validate the setting.
3 Or press the Up button to highlight the
Return ( ) icon, and then press the OK
( ) button to exit.
NOTE

Time lapse

Record still images at specific intervals you can set, and play them as one video file.
This effect is good for recording cloudscapes, seeds germinating, and flowers opening.
❖
OFF: Disable Time Lapse.
❖
1 SECOND: Record one frame per second.
❖
3 SECONDS: Record one frame every 3 seconds.
❖
5 SECONDS: Record one frame every 5 seconds.
1 In the Video Setting menu, select the TIME
LAPSE icon and then press the OK (
button to enter its setting menu.
2 Use the Up/Down button to select the
desired setting, and then press the OK (
button to validate the setting.
3 Or press the Up button to highlight the
Return ( ) icon, and then press the OK
( ) button to exit.
Operation
) button to
❖
Be sure to aim the camcorder at the subject and position it
securely before the Record button is pressed.
❖
Once the Pre-record function is activated, it will be disabled
when you set up any other setting.
Operation
Display Screen
)
Display Screen
)
)