Using The Pre-Record Function; Picture Recording; Using The Flash Or Digital Light Function - Toshiba PA3790U-1CAM Camileo X100 User Manual

Using the pre-record function

The Pre-record function ensures that you will not miss any critical
recording opportunities, as movies are recorded 3 seconds before
the OK button is pressed.
To use the Pre-record function:
1 Press the Pre-record button (
Pre-record icon(
2 Aim the camcorder at the subject.
3 Press the OK button to start recording. (The camcorder records
3 seconds before you actually press the OK button.)
To use the function again, repeat steps 1-3 above.
NOTE

Picture recording

In Picture Record mode (The Picture Record LED indicator is lit),
press the OK button to take a picture.
Press Playback button to view the picture.
The three resolution settings available are:

Using the Flash or digital light function

The camcorder has three Flash settings and one additional setting
that allows you to increase the brightness of an object, which may
be dark or in shadow.
To use light function:
1 Flash Auto (
light conditions. Use this mode for general photography,
(Picture Recording only).
2 Red Eye Reduction (
red-eye effect, (Picture Recording only).
) appears on the LCD touch screen.
The Time Lapse function cannot be used when the Pre-Record
function is activated.
Image Quality
High Quality: 16 Mega Pixels
Standard Quality: 5 Mega Pixels
Low Quality: 3 Mega Pixels
): The flash fires automatically according to
Using the pre-record function
) while in Record mode. The
): The pre-flash will fire to reduce the
Record Mode
25