Chapter 2
Initializing the disks
11
Once you have installed the Console (as described in
started it, and connected to the storage system (as described in
Console"), the System Initialization page displays:
If all the hard disks have not been detected, or if you want to add, remove, or
re-order the disks at this time, insert or remove the disks one at a time and click
Scan after each action.
1. Insert the installation CD into your computer's CD-ROM drive, type the path to
the firmware package in the File name text box, and click Upload.
Alternatively, you can click Browse and browse the CD for the firmware package.
The firmware package is the file on the CD that ends in the PKG file extension.
Getting Started
"Installing the
Console"),
"Starting the
Altos easyStore Manual
11