Chapter 5
Changing the backup schedule
118
When you protect a disk, you specify when you want backups to occur. However,
you can change this schedule at any time as long as the Status page indicates that the
Status is Normal. If protection is stopped (for example, if you recovered the disk
or recovered a different partition on the same disk), you cannot change the
schedule until you resume protection by clicking Back Up Now.
To change the backup schedule:
1. Click Schedule.
2. In the Protected disk list, select the disk whose backup schedule you want to
change.
3. Specify when you want backups to occur.
For example, if you want backups to occur every day, select Daily from the
Recurrence list. If you want backups to occur once a week, select the day of the
week from the Recurrence list. Then select the time.
If you don't want backups to occur automatically, select Not Scheduled from the
Recurrence list. Backups will occur only when you start one manually (as
described in
"Manually backing up your
4. Click Apply.
5. When the confirmation message displays, click Yes.
6. When the result message displays, click OK.
Protecting Local Disks
disk").
Altos easyStore Manual