Display
Depending on the position of the
function selector and/or touching of a
control, the following symbols appear:
Temperature
u
Time of day
Duration
End time
System lock
3
Temperature indicator
Timer
h
Hours
min
Minutes
Triangle V in the display
When a control is touched, the
symbols of functions which can be
altered will light up in the display.
These will vary depending on program.
Touch the "V" or "W" control repeatedly
until triangle V is underneath the
symbol of the required function.
Then select the function using the "OK"
control.
Triangle V will flash for approx.
15 seconds.
You can only make entries with the
"V" or "W" controls while the triangle
V is flashing.
If the triangle has stopped flashing,
you will need to select the function
again with the "OK" control.
Guide to the display
I2:00
3
m
V
325
m
V
h
min
11