Appendix A - Obtaining Hp Netraid Utilities - HP LC2000r - NetServer - 128 MB RAM Configuration Manual

APPENDIX A - Obtaining HP NetRAID Utilities

To get updated versions of the HP NetRAID utilities that contain firmware, drivers and the HP NetRAID
Assistant program, you must download, extract, and then copy nr_clust.exe, a special version of the HP
NetRAID utilities optimized for cluster installations.
To obtain NetRAID firmware, you need to download nr_clust.exe (release 1.0) from the HP's FTP site.
ftp://ftp.hp.com/pub/servers/software
Once you have downloaded nr_clust.exe, you need to extract and copy the HP NetRAID files and utilities to
floppy diskettes.
To extract and copy the HP NetRAID utilities:
1. From Windows NT Explorer, run nr_clust.exe by double-clicking the file.
nr_clust.exe is self-extracting and when executed creates the three subdirectories shown in the table
below.
File Sub-Directory
Fw_dvr
Nrast_1
Nrast_2
2. Label three blank formatted diskettes as indicated in the above table.
3. Copy the contents of each of the subdirectories to an appropriately labeled floppy disk.
NOTE
Contents Description
NetRAID firmware update and NetRAID
Driver for Windows NT
HP NetRAID Assistant program Setup
HP NetRAID Assistant program files
When using Windows NT Explorer to copy the directory contents make sure that the
explorer view options are set to Show all files using the Options and View
menu commands so that all files will be copied.
30
Disk Label
NR Firmware & Driver
HP NetRAID Assistant 1
HP NetRAID Assistant 2