HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 21

11. Repeatedly press the Esc key to exit the NetRAID Express Tools utility. When prompted to exit, choose
Yes.
12. Press Enter to reboot System A, then repeat the above procedure for System B.
13. To save a reboot cycle of System B, in Part 4 insert the HP NetServer Navigator CD into the CD-ROM
drive for System B at this time.
14. Reboot System B, and go to Part 4 - Installing Microsoft Windows NT, and NetRAID Software.
The utility reboots to enable the changes you have made.
NOTE
If you have two NetRAID adapters installed in each system, steps 3 through 14 must also
be performed for the second adapter.
10