Reports; Downloading Hp Sum And Components From The Sdr - HP ProLiant DL320e User Manual

Reports

HP SUM generates three types of reports about the specified system or repository. HP SUM generates
these reports by using the command-line arguments. If no additional arguments are specified on
the command line, HP SUM uses the local host and default repository locations (the directory where
HP SUM was initiated). You can specify a target if you provide the appropriate credentials. You
can specific a repository by using other command-line parameters to generate reports. For specific
commands, see
Report type
/report
/inventory_report
/firmware_report
/dependency_report
/installed_report
HP SUM generates the reports as XML or HTML files that you can view in a JavaScript-enabled
web browser. The supported browsers for viewing the report files are Microsoft Internet Explorer
6.0 and Mozilla Firefox 3.5 and later. By default, the reports are located in the current working
directory from where HP SUM was initiated. If that current location is write-protected, the reports
are located in the same directory as the HP SUM log files.
HP SUM generates reports in CSV format that you can open in any application that supports CSV
format.
The HP SUM log files are located in these folders:
On Windows operating systems: C:\cpqsystem\hp\log
On Linux: /var/hp/log
When HP SUM generates the report, the HP SUM GUI does not appear. When the report is
generated, HP SUM displays the report file location.

Downloading HP SUM and components from the SDR

If you are using a Linux system, you can download HP SUM as an RPM from the HP SDR. This
allows you to download and install HP SUM and components from the SDR using common YUM
"Command-line interface" (page
Description
This argument generates a report
listing, a target summary, and
description of how the
components in the repository
affect the target. For example,
whether each component applies
to the target.
Usage: hpsum /report
This argument generates a report
listing of the components in the
specified repository.
Usage: hpsum
/inventory_report
This argument generates a report
listing of the firmware in the
specified repository.
Usage: hpsum
/firmware_report
This argument generates a report
that lists failed dependencies for
all targets.
This argument generates a report
that lists all installed firmware,
software, and driver versions
installed on targets.
31).
Report file information*
The following report files are generated:
hpsum_Report_<date>.html
hpsum_Report_<date>.xml
hpsum_Report_<date>.csv
The following report files are generated:
hpsum_Inventory_Report_<date>.html
hpsum_Inventory_Report_<date>.xml
hpsum_Inventory_Report_<date>.csv
The following report files are generated:
HPSUM_Firmware_Report_<date>
fwreport.xml is placed in a folder named
HPSUM_Firmware_Report_<date>
The following report file is generated:
HPSUM_FailedDependency_Reports_<datatime>.xml,
.html, or .csv.
The following report file is generated:
HPSUM_Installed_Report_<datatime>.xml ,
.html, or .csv.
Reports 55