Download Print this page

HP D7171A - NetServer - LPr Software Install Manual page 35

Ibm os/2 installation guide
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

system and verify that the HP 10BaseT adapter is firmly mounted in its slot and that the
Ethernet cable is also connected firmly. If the physical connection is working, the green
light on the back of the adapter will come on when you power up the system.
NOTE: OS/2 2.X requires an IBM service pack. IBM OS/2 2.0, 2.1, and 2.11 need a new
version of the OS2LDR module to allow drivers to register shared interrupts. This is
documented in IBM APAR PJ14230. Contact IBM to order a service pack to update the
OS2LDR module. This patch is also required for OS/2 2.11 SMP prior to version S.629.
HP J3171A/D5013A PCI Ethernet Adapters
This network adapter is included with the HP NetServers LD Pro, LC II and HP NetServer E 45.
The Network Driver Interface Specification (NDIS) 2.x is a specification for NIC (network
interface card) drivers used by many OS/2 networking products to gain access to the LAN. For
instance, the OS/2 Warp Server and OS/2 LAN Server products use the HP NDIS 2.x driver
when you configure a network server to communicate via the IBM OS/2 NETBIOS protocol.
The HP NDIS 2.x driver is self-configuring, which means that the driver will automatically
locate and read the J3171A/D5013A adapter configuration. Only the DRIVERNAME parameter
needs to be present under the [HPTX_NIF] section in the PROTOCOL.INI file.
The HP NDIS 2.x driver hptx.os2 for IBM LAN Services OS/2 servers and requesters is located
on the Drivers Diskette for OS/2, which can be generated by the HP NetServer Navigator CD.
The IBM OS/2 LAN Server, OS/2 Warp Server, and OS/2 Warp Connect products also require
the unique NIF file, hptxos2.nif.
Location of files on the drivers diskette:
\NICDRV\HPTX.OS2
\NICDRV\HPOS2.NIF
If you did not create an OS/2 drivers diskette, you can find the above LAN adapter drivers and
supporting files in the \PERIPH\NICDRV\OS2\D5013 subdirectory of the HP NetServer
Navigator CD. Also you can use the Navigator diskette library to create a driver diskette which
contains OS/2 ODI drivers plus other NOS drivers for the D5013.
Sample configuration file
PROTOCOL.INI will include:
[HPTX_NIF]
DriverName = HPTX$
General installation - LAN Server and OS/2 Requester (4.0 or 3.0)
1. Run the MPTS utility with LAN Server 4.0 or OS/2 Requester 4.0 (Run the LAPS utility
with LAN Server 3.0 or OS/2 Requester 3.0)
35

Advertisement

loading