HP P2000 Reference Manual page 27

252
Info. Snapshot write data on the indicated master volume has been deleted.
Recommended actions
• No action required.
253
Info. A license was uninstalled.
Recommended actions
• No action required.
255
Info. The PBCs across controllers do not match as PBC from controller A and PBC from controller B are from
different vendors. This may limit the available configurations.
Recommended actions
• No action required.
256
Info. The indicated snapshot has been prepared but is not yet committed. This can occur when a snapshot is
taken by an application, such as the VSS hardware provider, that is timing-sensitive and needs to take a
snapshot in two stages.
After the snapshot is committed and event 258 is logged, the snapshot can be used.
Recommended actions
• No action required.
257
Info. The indicated snapshot has been prepared and committed and is ready for use.
Recommended actions
• No action required.
258
Info. The indicated snapshot has been committed and is ready for use.
Recommended actions
• No action required.
259
Info. In-band CAPI commands have been disabled.
Recommended actions
• No action required.
260
Info. In-band CAPI commands have been enabled.
Recommended actions
• No action required.
261
Info. In-band SES commands have been disabled.
Recommended actions
• No action required.
HP P2000 G3 MSA System Event Descriptions Reference Guide 27