HP D5970A - NetServer - LCII Reference Manual page 42

Chapter 3
Table 3-2. 230/240 VAC PDU Power and Current
1
Component
208 VAC E7671A or E7672A
PDU
HP NetServer D7057A, 500 MHz, 512K Cache
3 D7133A, 500 MHz, 1MB Cache
LXr 8500
D7058A, 500 MHz, 2MB Cache
HP NetServer Rack Storage/12 is D5989A
Mass Storage Rack Storage/12FC is D5991A
Unit
HP Console
Switch
Note 1 More ratings are listed in Table 2-6. For a full list of power ratings, see the rack
configuration utilities (for instance, Rack Assistant) on the HP Web Site.
Note 2 Indicated current ratings are for use in selecting PDU and UPS components and
may not reflect actual measured amounts.
Note 3 When ordered through select express, the D7057A becomes D7062AV, the
D7133A becomes D7063AV, and the D7058A becomes D7134AV.
Description of the Recommended 230/240 VAC Configuration
Figure shows a UPS connected to the power mains through an attached power
3-6
cord (appropriate cords are supplied for each country). The UPS has eight IEC
320 receptacles for use with the rack jumper cords. The E7671A PDU connects to
the UPS via a detachable line cord, which connects to the PDU via a C-19 plug.
This cord connects to the UPS with a C-20 plug. The 200/240 VAC PDU has two
IEC 320, C-19 and six IEC 320, C-13 receptacles for connecting rack jumper
cords.
38
Procedure for Connecting and Routing Cables to the LXr 8500
Power
Model
(VA)
1121
J1497B
Power Current
2
(W)
(A)
N/A N/A max 16
1077 4.9
547 538 2.3
42 29 0.2