Starting Scsiselect - HP D5970A - NetServer - LCII Installation And Configuration Manual

SCSISelect Options
Initiate Wide Negotiation
Enable Disconnection
Send Start Unit Command
Enable Write Back Cache
BIOS Multiple LUN Support
Include in BIOS Scan
Advanced Configuration Options:
Reset SCSI Bus at IC Initialization
Display <Ctrl> <A> Messages during
BIOS Initialization
Extended BIOS Translation for
DOS Drives > 1 GByte
Verbose/Silent Mode
Host Adapter BIOS
2
Domain Validation
Support Removable Disks Under BIOS
2
as Fixed Disks
BIOS Support for Bootable CD-ROM
BIOS Support for Int 13 Extensions
1
Setting is valid only if Multiple LUN Support is enabled
2
Settings are valid only if host adapter BIOS is enabled

Starting SCSISelect

Follow these steps to start SCSISelect:
1. Turn on or restart your system.
16
Available
Settings
Yes, No
Yes, No
Yes, No
N/C (No Change)
1
Yes, No
2 Yes, No
2 Yes, No
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Verbose, Silent
Enabled
Disabled: Not Scan
Disabled: Scan Bus
Enabled, Disabled
Disabled, Boot Only,
All Disks
2 Enabled, Disabled
2 Enabled, Disabled
Default
Setting
Yes (Enabled)
Yes (Enabled)
Yes (Enabled)
N/C (No
Change)
No (Disabled)
Yes (Enabled)
Enabled
Enabled
Enabled
Verbose
Enabled
Enabled
Disabled
Enabled
Enabled