Computer Setup (F10) Utility menu
NOTE:
With new BIOS releases, the following content is subject to change , so your menu might
appear different than shown.
Table 4-1
Computer Setup (F10) Utility menu descriptions
Heading
File
Storage
ENWW
Option
●
System
Product Name
Information
●
SKU Number
●
Processor Type/Speed/Stepping
●
Cache Size (L1/L2)
●
Installed Memory Size
●
Integrated MAC
●
System BIOS
●
Chassis Serial Number
●
Asset Tracking Number
About
Displays copyright information.
Set Time and
Enables you to set system time and date.
Date
Flash System
CD-ROM—Enables you to upgrade the BIOS from a ROM image on a CD.
ROM
USB—Enables you to upgrade the BIOS from a ROM image on a USB drive or memory stick.
Replicated
Save to Removable Media—Saves the system configuration, including CMOS, in the qsetup.txt
Setup
file. This file can be saved to a formatted, blank 1.44-MB diskette, or to a USB device.
Restore from Removable Media—Restores the system configuration from a diskette.
Default Setup
Save Current Settings as Default—Saves the current settings as default settings for the next
operation.
Restore Factory Settings as Default—Restores the factory settings as the default settings for the
next operation.
Apply Defaults
Restores factory default settings.
and Exit
Ignore Changes
Exits computer setup without applying or saving any changes.
and Exit
Save Changes
Saves changes to system configuration and exits the computer setup.
and Exit
Device
Lists all installed nonSCSI storage devices (except SATA devices) and provides options for
Configuration
obtaining specific information about each device.
Hard Disk—Provides information about the hard disk drives in the system.
CD-ROM—Provides information about the optical drives in the system.
Diskette Type (for legacy diskette drives only)— Identifies the highest capacity media type
accepted by the diskette drive. Options are 3.5" (1.44 MB), 5.25" (1.2 MB), and Not Installed.
Default Values—Resets devices to their default configuration (SATA is the default).
Description
Computer Setup (F10) Utility
27