The Computer Setup (F10) Utility Menu - HP Z400 - Workstation Maintenance And Service Manual

The Computer Setup (F10) Utility menu

The following table describes the functions available in the Computer Setup (F10) utility menu.
NOTE: With new BIOS releases, the following content is subject to change, so the menu might be
different than shown.
Table 4-1 Computer Setup (F10) Utility menu descriptions
Heading
File
ENWW
Option Description
System Displays the following system characteristics:
Information
● Product Name
●
QPI Link Speed
●
Memory Size
● Integrated MAC
● System BIOS
●
Boot Block Date
●
Chassis serial number
● Asset Tracking Number
●
Management Module
●
Processor Type
● Processor Speed
●
Processor Stepping
●
Cache Size
● DIMMs
About Displays copyright information.
System Displays system temperatures and fan speeds.
Temperatures
Set Time and Lets you set system time and date.
Date
Flash System Lets you upgrade the BIOS from a ROM image on diskette, CD, or USB.
ROM
Replicated Provides these options:
Setup
●
Save to Removable Media—Saves the workstation configuration, including CMOS, in the
qsetup.txt file. This file can be saved to a formatted, blank 1.44-MB diskette, or to a USB
device.
●
Restore from Removable Media—Restores the workstation configuration from a diskette or
a USB device.
Default Setup Provides these options:
● Save Current Settings as Default—Saves the current settings as default settings for the next
operation.
● Restore Factory Settings as Default—Restores the factory settings as the default settings for
the next operation.
Apply Defaults Restores the default settings defined in Default Setup.
and Exit
The Computer Setup (F10) Utility 33