HP Xw4400 - Workstation - 2 GB RAM Hardware Manual page 11

Figure 12 LSI WebBIOS – Virtual disk configuration
Step 6: The next screen will display the physical disks on the left and the proposed virtual disk (RAID
array) on the right as a preview of the proposed disk configuration. If changes are needed, press "Back"
to go back and change details of the configuration, or press "Accept" to accept the configuration. On the
next screen, press "Yes" to save the configuration, then press "Yes" to initialize the new RAID array. If
a disk in the RAID array fails or needs to be replaced for any reason, the WebBIOS utility can be used
to easily rebuild the RAID array. If a disk failure occurs, the change to the RAID array will be indicated
by a message on the screen before entering the utility.
Figure 13 Foreign configuration on LSI adapter
ENWW LSI 8344ELP and LSI 8888ELP Setup 11