Kenwood MDX-G3 Instruction Manual page 23

4
Press the TAPE ` key so that " 3 " is lit,
then press the 7 STOP key.
If "2" is lit, recording will start with the side
which is not facing the front.
5
Select the desired tape reverse mode.
(1) Press the MENU key.
(2) Rotate the VOLUME/MULTI-CONTROL knob
so that "TAPE RVS.?" is displayed, then press
the SET key.
(3) Rotate the VOLUME/MULTI-CONTROL knob
so that the desired reverse mode is dis-
played.
" " : ONE-WAY
" " : REVERSE
" " : ENDLESS
6
Press the TAPE O.T.E. key on the remote.
If you are operating the main unit :
(1) Press the MENU key.
(2) Rotate the VOLUME/MULTI-CONTROL knob
so that "REC OPTIONS" is displayed, then
press the SET key.
(3) Rotate the VOLUME/MULTI-CONTROL knob
so that "CD=TAPE" is displayed, then press
the SET key.
Tape will stop after a sin-
gle side has been re-
corded.
Tape will stop after both
sides have been re-
corded.
Tape will stop after both
sides have been re-
corded.
Tape transport direction
T A P E S T O P
EX. BASS
Reverse mode
R E V E R S E
EX. BASS
Elapsed time of CD track
being played
CD track No.
C D
EX. BASS
Continued on next page \
Tape recording
indicator
"O.T.E."lit
23
EN