Cisco SPA112 Administration Manual page 84

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Field
Block ANC Act Code
Block ANC Deact
Code
DND Act Code
DND Deact Code
CID Act Code
CID Deact Code
CWCID Act Code
CWCID Deact Code
Dist Ring Act Code
Dist Ring Deact
Code
Speed Dial Act Code
Paging Code
Secure All Call Act
Code
Secure No Call Act
Code
Secure One Call Act
Code
Secure One Call
Deact Code
Conference Act
Code
Description
Blocks all anonymous calls. Default setting: *77.
Removes blocking of all anonymous calls. Default
setting: *87.
Enables the do not disturb feature. Default setting: *78.
Disables the do not disturb feature. Default setting: *79.
Enables caller ID generation. Default setting: *65.
Disables caller ID generation. Default setting: *85.
Enables call waiting, caller ID generation. Default setting:
*25.
Disables call waiting, caller ID generation. Default
setting: *45.
Enables the distinctive ringing feature. Default setting:
*26.
Disables the distinctive ringing feature. Default setting:
*46.
Assigns a speed dial number. Default setting: *74.
Used for paging other clients in the group. Default
setting: *96.
Makes all outbound calls secure. Default setting: *16.
Makes all outbound calls not secure. Default setting: *17.
Makes the next outbound call secure. (It is redundant if
all outbound calls are secure by default.) Default setting:
*18.
Makes the next outbound call not secure. (It is redundant
if all outbound calls are not secure by default.) Default
setting: *19.
If this code is specified, the user must enter it before
dialing the third party for a conference call. Enter the
code for a conference call.
4
84