Cisco SPA112 Administration Manual page 62

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide
Log Upgrade
Request Msg
Log Upgrade
Success Msg
Log Upgrade Failure
Msg
License Keys
General Purpose Parameters
GPP A to GPP P
Syslog message issued at the start of a firmware
upgrade attempt. Default setting: $PN $MAC --
Requesting upgrade $SCHEME://
$SERVIP:$PORT$PATH.
Syslog message issued after a firmware upgrade
attempt completes successfully. Default setting: $PN
$MAC -- Successful upgrade $SCHEME://
$SERVIP:$PORT$PATH -- $ERR.
Syslog message issued after a failed firmware upgrade
attempt. Default setting: $PN $MAC -- Upgrade failed:
$ERR.
This field is not currently used by the SPA100 Series
ATAs.
General purpose provisioning parameters. These
parameters can be used as variables in provisioning
and upgrade rules. They are referenced by prepending
the variable name with a '$' character, such as $GPP_A.
Default setting: (empty)
4
62