Connect The Telephone Line - Canon PIXMA MX860 Getting Started

2

Connect the Telephone Line

To use the machine as a fax, a telephone line
needs to be connected.
This section describes the basic method of
telephone line connection.
For other connection methods, refer to the on-screen
manual: Basic Guide.
When not using
as a fax:
When using as both a
fax and telephone:
When using as a
fax only:
• If you cannot send faxes after installing the machine, check
the telephone line type. For details, refer to "Confirming
the Telephone Line Connection" in the on-screen manual:
Basic Guide.
1
Go to "3 Turn the
Connect the machine with a telephone line
Power On" on
using the supplied telephone line cable (A).
page 4.
When using as a fax only:
Go to "3 Turn the Power On" on page 4.
only
2
A
Remove the telephone connector cap (B), then
connect a telephone with the telephone line
cable.
• Do not connect the machine and a telephone in
parallel to the same telephone line using a distribution
adapter. The machine may not operate properly.
Only when connecting a telephone:
B