14
3
A
C
Turn on the machine (A).
When the machine is recognized by the computer, a
message appears on the screen.
•
If installation does not continue after 10 minutes,
click Help on the screen in step
message.
4
When the Setup Preparations dialog
box appears, confirm that preparation
is complete, then click Next.
, then confirm the
Windows
If the following dialog box appears
When the Access Points dialog box appears, select an
access point to use, then click Connect.
When an access point is detected automatically, the Access
Points dialog box does not appear.
•
To connect to the access point with WEP, WPA or WPA2 displayed
in the Encryption column, enter the network key, then click
Connect. For details on network keys, refer to "3.1 About Network
Key (Windows)/Network Password (Macintosh)" in the printed
manual: Network Setup Troubleshooting.
•
If you want to select an access point manually, or if the target access
point is not displayed in the list, or if an error message appears, refer
to "5 The following screen is displayed during setup" in the printed
manual: Network Setup Troubleshooting.
Macintosh