Scan Tab - Canon 3301B002 On-Screen Manual

Scan Tab

>
Advanced Guide Scanning
Tab
Scan Tab
On the Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images. Close ScanGear
automatically is selected by default.
Close ScanGear automatically
Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically
Select this to return to the ScanGear (scanner driver) screen for another scan when scanning is
completed.
Display the dialog to select next action
Select this to open a screen and select what to do when scanning is completed.
Note
Even if Do not close ScanGear automatically or Display the dialog to select next action is set,
some applications may not support it.
ADF Duplex Paper Output Settings
Specify how to output the paper when scanning both sides of multiple documents at one time from the
ADF (Auto Document Feeder). Output by back/front(Fast) is selected by default.
Output by back/front(Fast) is set when scanning into applications such as OCR software that do not
>
Scanning with Other Application Software
> ScanGear (Scanner Driver) Screens
Page 647 of 997 pages
> Scan