System Setup - Canon imagePROGRAF iPF6200 User Manual

System Setup

Setting Item
Warning Buzzer
Detect Mismatch Choose Warning for notication (display of a warning message)
Keep Media Size
Paper Size Basis Sht Selection
Roll Selection 1
Roll Selection 2
TrimEdge
Reload
Noz. Check
Freq.
Sleep Timer
Description, Instructions
Set the buzzer. Choose On for the buzzer to sound once for warnings
and three times for errors.
during printing if the paper type specied in the printer menu does not
match the paper type in the printer driver. Choose None to continue
to print without notication. Choose Pause to have printing paused
under these circumstances. In this case, you can continue printing
by pressing the Online button.
Select On to use the paper size setting as the basis for printing
instead of other settings. The margin setting of the printer menu will
be used instead of the margin setting of the printer driver if the latter
is smaller, which may prevent text or images in the trailing margin
from being printed.
Choose Off to use the printer driver settings instead. Even if the
margin setting of the printer driver is smaller than that of the printer
driver, text or images will not be cut off. However, this requires longer
paper because the actual margin will be equal to the margin setting
of the printer driver plus the margin setting of the printer menu.
If sheet size detection is activated, choose whether ISO A3+ or
13"x19"(Super B) is applied when an intermediate size is detected.
If roll size detection is activated, choose whether ISO A3 (297mm)
or 300mm Roll is applied when a roll of an intermediate width is
detected.
If roll size detection is activated, choose whether 10in. (254mm)
or JIS B4 (257mm) is applied when a roll of an intermediate width
is detected.
When Automatic is selected, the leading edge will be cut as needed,
taking into account how long the paper has been loaded without being
printed. (However, it is not cut if Cutting Mode is set to Manual.)
Choose On to cut the leading edge.
Specify the timing for automatic checks of nozzle clogging. Choose 1
page to check once per printed page. Choose 10 pages to check
once per ten printed pages. Choose Automatic to have the printer
automatically adjust the timing for checks based on the frequency
of nozzle use.
Specify the period before the printer enters Sleep mode.
Control Panel
Printer Parts 67