Register A Custom Page Size - Canon imagePROGRAF iPF6200 User Manual

Register a Custom Page Size

This example describes how to register and print using a page size that is horizontally elongated and suitable
for banners in either horizontal or vertical format.
1.
Create the document in the application.
2.
Choose Page Setup from the application menu to display the Page Attributes dialog box.
3.
Select the printer in the
4.
Click Manage Custom Sizes in the
dialog box.
5.
Double-click Untitled in the list at left, and then enter a name for the page size you want
to register. Here, enter "100*500".
If the Untitled size is not listed at left, click + below the list.
6.
Under Page Size, enter "10" in Width and "50" in Height. Here, measurements are entered
in centimeters.
7.
Specify the margins by entering "0.3" in Printer Margins. Here, too, measurements are entered
in centimeters.
8.
Click OK to close the Custom Page Sizes dialog box.
9.
C
In the Paper Size list, click the size of the original. In this case, click "100*500", the size
you registered.
10.
D
In Orientation, click the icon of the document in landscape orientation.
11.
F
Click OK to close the dialog box.
B
Format for list.
C
Paper Size list to display the Custom Page Sizes
Printing banners or at other non-standard sizes
Enhanced Printing Options 297