HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Installation Manual page 38
Modular smart array
Hide thumbs
Also See for AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive:
- Installation manual (126 pages) ,
- Maintenance and service manual (120 pages) ,
- Replacement instructions (5 pages)
Table of Contents
Advertisement
Installation Procedures - All Deployments
Use the following instructions to install the MSA and its storage enclosures:
1. Use the provided rack template as a guide to indicate where to place the rails
38
Caution:
To prevent damage and to ease insertion of the device into the rack,
support the weight of the device and keep it level when sliding it into the rack.
WARNING:
To reduce the risk of personal injury or damage to the
equipment, be sure that:
The leveling jacks on the rack are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
The stabilizing feet are attached to the rack if it is a single-rack installation.
■
The racks are coupled together in multiple-rack installations.
■
Only one component in a rack is extended at a time. A rack may become
■
unstable if more than one component is extended.
for the component:
a. With the front of the template and the rack facing you, align the lower
edge of the template with the bottom of the rack (or the top of the
previous rack component.)
b. After verifying that the template is level, push the template tabs into the
rack holes to hold the template in place.
HP StorageWorks 1500 Modular Smart Array Installation Guide
Advertisement
Table of Contents
