Stand Setup Method - Hitachi StarBoard FX-DUO-63 User Manual

StarBoard FX-DUO Series

1.4.1 Stand Setup Method

Reconfirm that all the parts are present before assembling and setting up the stand (option).
FX-DUO-88W is only for the wall-mounting. Do not use FX-DUO-88W with the stand.
CAUTION
Tighten the screws securely.
Failure to comply may cause the stand to collapse, resulting in personal injury, or may
cause damage to this product due to shock of impact from the board falling.
[1] Assemble the stand
FX-DUO-77/FX-DUO-63 are available with the stand.
Assemble the stand according to the following diagram. The numbers in the diagram
correspond to the numbers in the parts list on page 1-3.
(7)
Short
Long
Align both feet with the
longer side facing forward.
Important
FX-DUO-88W is only for the wall-mounting. Do not use FX-DUO-88W with the stand.
(1)
(4)
(9)
(5)
(2)
Fasten with a
Phillips screwdriver.
(3)
(8)
1-8
Introduction
(7)
Fasten with a
Hexagonal
wrench.
English