0Cxd Expansion Rack Requirements; Eva8400 0C9D Expansion - HP 6400/8400 Reference Manual

Expansion rack
components
1
AP712A
1
Use 1 AP712A per each of the first 3 disk enclosures.
Table 2 EVA8400 0C9D expansion
Expansion rack com-
ponents
AF002A
252663–xxx
AG638B
1
AP712A
1
Use 1 AP712A per each of the first 3 disk enclosures.

0CxD Expansion rack requirements

One existing 2CxD main rack containing a properly wired controller pair and disk enclosures
(see Figure
The controllers may be above or in the middle of the disk enclosures, depending on the number
of disk enclosures and how the rack was initially configured.
six disk enclosures below the EVA8400 controllers.
The main rack must be running properly.
A new 0CxD expansion rack containing properly wired disk enclosures (see
is an example only, showing six disk enclosures and assuming there are six disk enclosures in the
main rack.
8 Getting started
Quantity per 0CxD
Up to 2 for EVA6400
Up to 3 for EVA8400
Quantity per 0C9D
1
2 (minimum HV)
4 (minimum LV)
9
3
1).
Description
HP EVA6400/8400 expansion rack accessory kit,
which contains:
HP 5m Multi-mode OM3 LC/LC FC Cable (4)
4Gb Short Wave FC SFP+ 1 Pack (8)
ROHS, SPOOL, Millennium Cable (4)
Velcro, Strap 5" (8)
Label, Cable Kit (2) - 1 blank red/green; 1
numbered red/green
Description
EVA 42U HP 10000 G2 series rack
Power distribution unit (country specific)
M6412–A FC disk enclosure
HP EVA6400/8400 expansion rack accessory kit, which
contains:
HP 5m Multi-mode OM3 LC/LC FC Cable (4)
4Gb Short Wave FC SFP+ 1 Pack (8)
ROHS, SPOOL, Millennium Cable (4)
Velcro, Strap 5" (8)
Label, Cable Kit (2) - 1 blank red/green; 1 numbered
red/green
Figure 1 is an example only, showing
Figure 2). Figure 2