1. Loop 1
2. Loop 2
Figure 17 0C6D expansion rack for the EVA6400
.
1.
Using 0.41m Fiber Channel copper cables, connect the disk enclosures in the first loop:
a.
Connect P2 (I/O-A) on S-7 to P1 (I/O-A) on S-8.
b.
Connect P2 (I/O-A) on S-8 to P1 (I/O-A) on S-9.
c.
Connect P2 (I/O-B) on S-7 to P1 (I/O-B) on S-8.
d.
Connect P2 (I/O-B) on S-8 to P1 (I/O-B) on S-9.
2.
Using 0.41m Fiber Channel copper cables, connect the disk enclosures in the second loop:
a.
Connect P2 (I/O-A) on S-10 to P1 (I/O-A) on S-11.
b.
Connect P2 (I/O-A) on S-11 to P1 (I/O-A) on S-12.
c.
Connect P2 (I/O-B) on S-10 to P1 (I/O-B) on S-11.
d.
Connect P2 (I/O-B) on S-11 to P1 (I/O-B) on S-12.
3.
Connect the rack power distribution units to a power source.
4.
Using a power cord provided in your kit, plug one end into a disk enclosure power supply and
the other end into a rack power distribution module. Plug the left power supply into the left module
and the right power supply into the right module.
5.
Repeat
Step 4
for each disk enclosure in the expansion rack.
6.
Power on the rack distribution units.
22
Installing disk enclosures into the expansion rack