When Checking Traffic Congestion Information Manually; Traffic Flow Information - Pioneer AVIC N2 - Navigation System With DVD player Operation Manual

Difference in distance and travel time between
existing route and new route
Distance from the current position of your vehicle
to the point of entry into the new route.
On this screen, you can select the following
items:
New :
A new route is displayed on the screen.
Current :
The current route is displayed on the screen.
OK :
Select the route to that displayed on the screen.
❒ When no selection is made, the current route
will be automatically selected after a short
while.
When checking traffic conges-
tion information manually
Touching on the screen allows you to
check for traffic congestion information on your
route.
If there is any information about a traffic conges-
tion on your route, a message appears asking you
whether to search for another route to avoid the
traffic congestion. If there is no traffic congestion
information along the route being guided, it is
announced on screen and by voice.
If there is a traffic congestion informa-
tion on the route
When receiving information about a traffic con-
gestion, the message announcing the presence
of a traffic congestion is indicated. Voice recogni-
tion then becomes available automatically when
the microphone is connected.
On this screen, you can select the following
items:
Yes :
The route is recalculated taking the traffic con-
gestion into account.
52
No :
The message disappears, and the map display
reappears.
List :
The list with traffic information on the route is
displayed.
❒ In the memory navi mode, you cannot touch
other than No.
If there is no traffic congestion informa-
tion on the route
If there is no traffic congestion information, the
message informing that there is no traffic con-
gestion information on the route, is shown.
On this screen, you can select the following
items:
List :
The list with all traffic information is displayed.
Back :
Message disappears, and returns to the map
screen.
❒ In Memory Navi mode, no detailed informa-
tion is available for traffic information on List.
❒ If there is no traffic congestion information,
the Navigation System does not automatically
switch to voice recognition.
Following types of traffic incidents on the route
will be checked: stop and go, stopped traffic and
closed/blocked roads.

Traffic flow information

When the map scale is between 0.02 mi (25 m) –
1 mi (2 km), red, yellow, or green blinking lines
may appear on either sides of a road. These
colors indicate the average speed at which traffic
is flowing along these streets. Here is a guide to
the colors and the average speed they indicate:
RED: average speed in this area is between 0-20
mph (0-32 km/h)
YELLOW: average speed in this area is between
20-40 mph (32-64 km/h)
GREEN: average speed in this area is 40 mph (64
km/h) or faster
❒ In addition to these blinking lines, a round
icon with a number may appear on the map.
The number in the icon indicates the actual
average speed of that specific area.