5
If you decide to delete the job, press [((-)] for <YES>.
NOTE
•
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot be restored.
•
The LCD can display characters in ASCII cord. Using characters other than those in ASCII cord may have the LCD
display garbled characters.
6
Press [Stop/Reset] to return to the standby display.
Confirming and Deleting a Report Job
1
Press [Status Monitor].
2
Press [((-)] or [)(+)] to select <REPORT STATUS> ➞ press [OK].
NOTE
•
If there is no job, <NO REPORT JOBS EXIST> is displayed.
•
If there is only one report job, go to step 4.
3
Press [((-)] or [)(+)] to confirm the report.
4
If you want to delete the report job, press [OK].
5
If you decide to delete the job, press [((-)] for <YES>.
NOTE
To cancel deleting the job, press [)(+)] for <NO>. Once the job is deleted, the job cannot be restored.
6
Press [Stop/Reset] to return to the standby display.
7
7-3