Starting Navigation - Panasonic CNGP50U - Car Strada Portable Mobile Navigation System Operating Instructions Manual

The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Stopping Simulation
You may stop simulation at any time.
Tap the Menu button.
►
The M
6.4.3

Starting Navigation

You have calculated and displayed a route.
Route List
If you would like to see detailed directions for the route, tap the Route
List button.
Information: For detailed information about the functions in the R
L window, please refer to chapter "Route List" on page 34.
IST
Route Profile
A so called route profile forms the basis of the route calculation.
Tap Options > Route Profile if you want to view or change the route
profile.
Note: If you change the route options, these remain valid for
subsequent navigation.
Information about how to change individual route profile settings can be
obtained by tapping on the corresponding
The calculation of arrival times is based on the Route Profile setting.
This setting has no impact on the display of speed restrictions.
Starting Navigation
Tap the Start Navigation button or simply start driving.
►
Note: Text-to-Speech function will read off the street names during
navigation.
No GPS Reception
When the received GPS signal is not sufficient, the following message
appears:
- 24 -
window opens.
ENU
(Help) button.
Routes with Stages
OUTE