Entering Route Points; Editing Route Points - Panasonic CNGP50U - Car Strada Portable Mobile Navigation System Operating Instructions Manual

If you want to enter your current location as the starting point:
2. Tap on the Current Location menu item.
If you want to enter a different starting point:
2. Tap the corresponding button.
3. Enter the starting point. (See the corresponding section of chapter
"Navigation" on page 10)
4. Tap the Set Starting Point button.
The selected starting point will now be displayed next to the
0 (Starting Point) button.
Changing the Starting Point
Tap the Specify Starting Point field.
►
The S
starting point. Proceed as described above.
6.1.2

Entering Route Points

Route points of a route are destinations that you want to navigate to.
The flow number for each route point can be found on a button in front
of it.
1. Tap the Add Route Point field.
The R
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of chapter
"Navigation" on page 10)
4. Tap the Add button.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
6.1.3

Editing Route Points

Route points can be deleted from a route. The order of the route points
can be varied as you like.
Note: The start point (flow number "0") can neither be moved nor
deleted.
Tap on the route point that you want to edit.
►
The context menu contains the following buttons:
Routes with Stages
P menu opens. You can now enter a different
TARTING OINT
P menu opens.
OUTE OINT
- 21 -