Setting The Privacy Mask Area - Canon VB-M700F Operation Manual

6 [Smart Shade Control]
Smart shade control can be operated if the control
privileges have been obtained. Smart shade control
operations are the same as in the Admin Viewer. For
details, see "Setting the Smart Shade Control"
(P. 7-11).
7 Registered Privacy Mask Display Area
You can check where privacy masks have been set in
the image.
8 [Registered Privacy Masks]
Show the number of registered privacy masks. You can
set up to eight privacy masks.
9 [Next]
When multiple privacy masks are set, clicking this
button switches to the privacy mask selected.
A q [Color]
Choose the color for the privacy mask area. All privacy
mask areas are set to the selected color.
A a [Quick adding]
Add a privacy mask area and save it in the camera.
A s [Quick change]
Change a privacy mask area and save it in the camera.
A d [Delete]
Delete a privacy mask area saved in the camera.
A f [Detailed Settings]
Show the detailed settings.
A f -1 [Enable privacy mask] checkbox
Select the checkbox if you want to enable the
selected privacy mask area settings.
A f -2 [Privacy Mask Position and Size]
Set left and upper edge, width, and height of the
privacy mask.
A f -3 [Preview settings]
Reflect the settings specified under [Privacy Mask
Position and Size] in the image display area and
registered privacy mask display area.
A g [Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
A h [Save settings]
Save the privacy mask settings specified under
[Detailed Settings] in the camera.

Setting the Privacy Mask Area

Set the privacy mask area while checking the image on
the camera.
If you have not yet obtained the camera control
1
privileges, click the [Obtain/release Camera Control]
button and obtain the control privileges.
Set the position and size of the privacy mask area.
2
A preview frame showing the privacy mask area is
shown in the image display area.
If you want to change the size, drag the "■"
positioned at the four sides of the preview frame.
Drag from inside the frame to move the privacy mask
area.
If you want to cancel the changes and restore the
settings saved in the camera, click [Restore settings].
3 Click [Quick adding] to save the privacy mask area.
The set privacy mask area is saved in the camera.
You can set up to eight privacy masks. Repeat the
setting operations to set multiple privacy mask areas.
Privacy Mask Setting Tool
6
-5
6