DiBos/DiBos Micro
5.2
Automatic Alarm Recording
Incoming alarms can be recorded automatically (standard) or
manually on the recipient. The selection is made in the
configuration. In both cases, all the cameras that are assigned
to the alarm in the device list are displayed. Recording takes
place without audio.
The
been configured.
1.
2.
NOTICE!
–
–
Bosch Sicherheitssysteme GmbH
tab flashes red. An audio signal sounds, if this has
Click the
alarm status are listed. The audio signal is switched off.
The button for alarm recording
Click the
icon if you want to stop alarm recording.
Alarm recording is stopped.
Click the button to start alarm recording.
Alarm recording is started.
Click the button to stop alarm recording.
Alarm recording finishes when the alarm is deleted.
The button for alarm recording is immediately displayed
when incoming alarms are automatically displayed (see
Section 5.1.2 Automatic Display of Incoming Alarms).
Operation Manual
Operation - Live/Playback Mode | en
tab. The cameras or remote stations in
is displayed.
F.01U.033.372 | V5 | 2009.09
63