Table of Contents
Advertisement
5.4
MAKE AN EXTERNAL CO CALL WITH THE HELP OF AN OPERATOR OR AN
ASSISTANT
The operator or assistant can initiate an external call and then transfer the call to another
extension (see Paragraph 5.6).
Example: The operator (extension 805) initiates an external call, then transfers the call to
extension 801
•
The range for recognizing a Hook Switch tap generated line break as an internal
flash can be programmed from 550ms to 2000ms (see Paragraph 6.14). The
operator can press the FLASH button on the telephone instead of tapping the Hook
Switch
•
After tapping the Hook Switch and hearing internal dial tone, the operator should dial
the extension number within a short period. Otherwise the operator will be
reconnected to the external CO line.
5.5
EXTERNAL CALL WAITING
Format:
Press the <FLASH KEY> or tap the Hook Switch to get internal dial tone, then dial
#99
Description: When you are on an external conversation, a Call Waiting tone from the Local
Telephone Exchange may inform you that there is another external call waiting.
You can answer the waiting external call by pressing the <FLASH KEY> or by
tapping the Hook Switch to get internal dial tone and then dialing #99. This will put
the first external caller on hold at the exchange and connect you to the second
external caller.
If the second external caller hangs up you will be reconnected to the first external
caller.
Note: For the "Call Waiting" feature to work, you must subscribe to Call Waiting Service from
the Local Telephone Company
18
Advertisement
Table of Contents
