Setting Network Camera Password; Setting Network Camera Setting - Sony PCS-G50 System Integration Manual

1-11-4. Setting Network Camera Password

Registering the network camera password allows you to
restrict some users to access to network cameras.
If registered, users will be asked to enter it every time
accessing the network camera list in the Phone Book.
n
A password saved here can be also used to access to the
network camera list through the Web control function. (For
details on the Web control function, see section 1-11-10.)
1. Select "Password" under "Administrator Setup" using
and buttons on the remote commander and press
the PUSH ENTER button.
2. Select "Network Camera Password" using
buttons on the remote commander and set a password
of up to 10 characters.
Administrator Setup
Password
Page: 1/3
Administrator Password
Phone Book Modification Password
Save Settings Password
Remote Access Password
Streaming Broadcast Password
Network Camera Password
Save
3. Select "Save" using
commander and press the PUSH ENTER button.

1-11-5. Setting Network Camera Setting

With the Network Camera page, you can configure
whether or not to connect network cameras and which
transmission mode to use when connecting to cameras with
administrator authority.
Turning on "Network Camera Connection", the network
camera icon appears in the phone book and you can access
the network camera list to dial.
PCS-G70/G70P/G50/G50P
and
Cancel
and buttons on the remote
1. Select "Network Camera" under "General Setup"
using and buttons on the remote commander and
press the PUSH ENTER button.
2. Select "Network Camera Connection" using
buttons on the remote commander and press the PUSH
ENTER button. Then select "On" using
buttons and press the PUSH ENTER button.
Turning on "Network Camera Connection" makes the
network camera list icon appear on the phone book.
3. (In case of the use of administrator authority)
Configure the appropriate Bit rate, Frame rate, Mode
and Image Size for video sent from network cameras.
Select "Bit rate," "Frame rate," "Mode," or "Image
Size" using and buttons on the remote commander
and configure the appropriate settings. (For details on
each setting, see "General Setup" menu - "Network
Camera" in "1-5-2. System Setting Table" section.)
General Setup
Network Camera
Page: 1/1
Network Camera Connection On
Bit rate Auto
Frame rate Auto
Mode Auto
Image Size Auto
Save
n
In case of the use of user authority each of "Bit rate,"
"Frame rate," "Mode," or "Image Size" will be
disabled if configured on this page. Also see "1-11-2.
User Authority" section.
4. Select "Save" using and
commander and press the PUSH ENTER button.
and
and
(2)
(3)
Cancel
buttons on the remote
1-61