Sony PCS-G50 System Integration Manual page 17

7. Enter the telephone number(s) of the ISDN line used
by the system.
When the ISDN unit PCSA-B384S/B768S is used,
enter the same number in the text boxes A1 and A2 for
one line (except for the U.S.A. and Canada).
ISDN Setup Wizard
Area Code Local Number
A1
A2
B1
B2
C1
C2
Previous Next
Area Code:
Enter the area code.
Do not enter the first "0" of an area code.
Local Number:
Enter the telephone number.
m
. By pressing the PUSH ENTER button with a blank
text box selected, the content in the text box above
will be copied to the selected text box.
. When the ISDN unit PCSA-B384S is used to
connect two or three ISDN lines, enter the telephone
numbers in the text boxes B1 to C2.
. When the ISDN unit PCSA-B768S is used to
connect two to six ISDN lines, enter the telephone
numbers in the text boxes B1 to F2. To open the
menu with the text boxes D1 to F2, select "Next"
and press the PUSH ENTER button.
. When the ISDN unit PCSA-PRI
Ch23 (T1), or Ch1 to Ch30 (E1) are displayed. Enter
the telephone numbers according to the number of
channels to be used.
ISDN Setup Wizard
Area Code Local Number
Ch1
Ch2
Ch3
Ch4
Ch5
Ch6
Previous Next
8. Select "Next" using the , , , or
remote commander, then press the PUSH ENTER
button.
*: PCS-G70/G70P only
PCS-G70/G70P/G50/G50P
Cancel
*
is used, Ch1 to
Cancel
button on the
9. Enter the sub-address(es).
Only numeric characters are available for a sub-
address.
When the ISDN unit PCS-B384/B768 or PCSA-
B384S/B768S is used, enter the same number in the
text boxes A1 and A2 for one line.
ISDN Setup Wizard
Sub Address
A1:
A2:
B1:
B2:
C1:
C2:
Previous Next
m
. When the ISDN unit PCSA-B384S is used to
connect two or three ISDN lines, enter sub-addresses
in the text boxes B1 to C2.
. When the ISDN unit PCSA-B768S is used to
connect two to six ISDN lines, enter sub-addresses
in the text boxes B1 to F2. To open the menu with
the text boxes D1 to F2, select "Next" and press the
PUSH ENTER button.
. When the ISDN unit PCSA-PRI
Ch23 (T1), or Ch1 to Ch30 (E1) are displayed. Enter
the sub-addresses according to the number of
channels to be used.
10. Select "Next" using the , , , or
remote commander, then press the PUSH ENTER
button.
The LAN Setup Wizard is then displayed.
n
When the LAN is not used, select "Next" and proceed
to step 13.
Cancel
*
is used, Ch1 to
button on the
1-13