Set Up Ip Address - Fujitsu XG0224 Hardware Manual

XG0224 Hardware Guide
2.6

Set up IP address

Please set the IP address at times when it is required.
Eg. When setting the switch through www browser or installing a firmware from the initial state of the purchase.
The following commands show how to set up the IP address (ex. 192.168.1.1).
Command
XG0224# configure
XG0224(config)# lan 0 ip address 192.168.1.1/24 3
XG0224(config)# lan 0 vlan 1
XG0224(config)# commit
XG0224(config)# exit
XG0224#
Precautions
• The IP address is not set at the initial state of the purchase. Please set the IP address through console.
• When logging in by console, you will not be able to log in from the www browser. Please make sure to log off from
the console after setting up the IP address.
45
Chapter 2 Installation

Set up IP address