Time Setting - Fujitsu XG0224 Hardware Manual

XG0224 Hardware Guide
2.5

Time Setting

Make sure to set up the time before you do other settings of the switch. The time is not set at the initial timing of purchase.
Please refer below command for setting up time manually using console or telnet.
Command
When setting time and date to be "Jan1, 2011 12:30:00am" type in command
# date 2011/01/01.12:30:00
XG0224# configure
XG0224(config)# time zone -0500
XG0224(config)# commit
XG0224(config)# save
XG0224(config)# exit
XG0224# date 2011/01/01.12:30:00
Switch to Configuration mode.
When setting time zone to be "-0500".
Apply the configuration.
Save the configuration.
Switch to Operation mode.
Set time and date to be "Jan 1, 2011 12:30:00am".
44
Chapter 2 Installation

Time Setting