Configuring an autoloader
Add the following entries to /etc/mcicap to configure an autoloader:
mc0:\
# Digital TLZ6L/TLZ7L 4mm DAT Tape Autoloader
DAT Autoloader|tlz6l|tlz7l|Digital TLZ6L/TLZ7L|tsl9000|tsl10000:\
What next?
Once the device files have been created, you should confirm that your new tape drive is working
properly.
Chapter 8, "Verifying the installation"
sample file to test your installation.
24
HP (Tru64 5.1x) servers and workstations
:mc=/dev/changer/mc1:\
:dn=/dev/tape/tape23:tc=DAT Autoloader:
:it=scsi2:dt=tape:ae:re:
provides instructions on backing up and restoring a