Verifying the configuration of an autoloader on OpenVMS and
MRU
To verify the configuration, enter the following MRU command:
$ robot show robot gka401
Robot Name: gka401 Type: SCSI
Media Robot Identifier: HP
Slots:
Drives:
Inports:
Outports:
Transports:
For further details on MRU and using the robot commands, see the MRU User Guide.
What next?
Once device files have been created, you should confirm that your new tape drive is working
properly.
Chapter 8 on page 37
test your installation.
20
HP (OpenVMS) servers and workstations
DAT Autoloader
10
1
0
0
1
provides instructions on backing up and restoring a sample file to
1.00