Wlan Settings; Advanced Wlan Settings - Nokia 002F581 User Manual

network. To use e-mail and multimedia services or to
browse web pages, you must first define access points for
these services.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
To create a new access point, select
access point or select an existing access point from the
list and then Options
>
the access point as a basis for the new one.
Packet data (GPRS) settings
Select Menu Tools
> >
Packet data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
in GSM and UMTS networks, it is possible to have multiple
data connections active at the same time; access points
can share a data connection, and data connections remain
active, for example, during voice calls.
manager", p. 100.
To define the packet data settings, select
connection and select When available
device to the packet data network when you switch the
device on in a supported network, or
establish a packet data connection only when an
application or action requires it. Select
enter the access point name provided by your service
provider to use the device as a packet data modem to your
computer. To use a high-speed data connection, select
High speed packet access
Options New
>
Duplicate access point
Settings Connection
>
See "Connection
Packet data
to register the
When needed
Access point
> Enabled.
These settings affect all access points for packet data
connections.

WLAN settings

Select Menu
>
Wireless LAN.
To have an indicator displayed when there is a WLAN
to use
available in your current location, select
availability > Yes.
To select the interval for your device to scan for available
WLANs and update the indicator, select
networks. This setting is not available unless you select
Show WLAN availability
>

Advanced WLAN settings

Select Options
WLAN settings are normally defined automatically, and
changing them is not recommended.
To edit the settings manually, select
configuration
Long retry limit
•
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
to
Short retry limit
•
transmission attempts if the device does not receive a
and
clear-to-send signal from the network.
RTS threshold
•
the WLAN access point device issues a request to send
before sending the packet.
Tools Settings Connection
> >
Scan for
> Yes.
Advanced settings. The advanced
>
Automatic
> Disabled, and define the following:
— Enter the maximum number of
— Enter the maximum number of
— Select the data packet size at which
>
Show WLAN
117