Barcode Reader - Nokia 002F581 User Manual

Tip: You can configure the application's connection
setting to Always
VPN access point from a list of connections when a
connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your VPN
user name and passcode or password. If the SecurID
token has become out of synchronisation with the
clock of the ACE/Server, enter the next passcode. If you
are using certificate-based authentication, you may
have to enter the key store password.

Barcode reader

Select Menu Tools > Barcode.
>
Use the Barcode reader application to decode barcodes.
The codes may contain information such as URL links, e-
mail addresses, phone numbers, and business cards. The
Barcode reader does not support 1D codes. The Barcode
reader uses the camera in your device to scan codes.
To scan a code, select Scan
detected in the viewfinder, the decoded information
appears on the display. To scan a code that is located at
some distance from your device, deactivate the close-up
mode by selecting Options
To save the scanned data, select
data is saved in the BCR file format.
To save scanned data to Contacts, select
to Contacts or Save business
ask, in which case you select the
code. After a valid code is
Deactiv. close-up
>
Options > Save. The
Options
card, depending on the
data you are saving. If the data you scanned includes a
mobile phone number or an e-mail address, you can call
or send a message to the number or send an e-mail to the
address by selecting
message:. If the data you scanned includes a URL link, you
can open it by selecting
To view previously saved, decoded information, select
Saved data in the main view.
mode.
Add
>
Options Call or Options
>
Options Open link.
>
Create
>
111