Advanced Internet Access Point Settings For Packet Data (Gprs); Set Up An Access Point For Wlan Manually - Nokia 002C9N1 User Manual

Prompt password
•
password each time you log into a server or
the password in your device memory and automate
the login.
Password — Enter your password if required by the
•
service provider. The password is often case-sensitive
and provided by the service provider.
Authentication — Select
•
password always encrypted, or
password encrypted when possible.
Homepage — Enter the web address of the page you
•
want to display as the home page when you use this
access point.
4. After defining the settings, select
settings to define the advanced settings or
the settings and exit.
Advanced internet access point
settings for packet data (GPRS)
Select Menu Tools
> >
points.
After setting up a basic internet access point for packet data
(GPRS), select Options
>
following advanced settings:
Network type — Select
•
protocol type. The internet protocol defines how data is
transferred to and from your device.
Phone IP address — Enter the IP address of your device.
•
Select Automatic to have the network provide the device
© 2007 Nokia. All rights reserved.
— Select Yes to enter your
Secure to send your
Normal to send your
Options
>
Back
Settings Connection
>
Advanced settings, and define the
IPv4 or IPv6 as the internet
IP address. This setting is shown only if you select
Network type
No to save
DNS address
•
Secondary DNS address
required by your service provider. Otherwise, the name
server addresses are provided automatically.
Proxy server address
•
server. Proxy servers are intermediate servers used by
some service providers between a browsing service and
its users. These servers may provide additional security
and speed up access to the service.
Set up an access point for WLAN
Advanced
manually
to save
1. Select
Access
2. Select
access point, or select an existing access point from the
list and then
the access point as a basis for the new one.
Access
>
3. Define the following settings.
Connection name
•
connection.
Data bearer
•
WLAN network name
•
identifier (SSID), that is, the name that identifies the
specific WLAN, select
network from the WLANs in range, select
networks.
> IPv4.
— Select Primary DNS address
and enter their IP addresses, if
— Enter the address of the proxy
Menu Tools Settings
> >
points.
Options New access point
>
Options Duplicate access point
>
— Enter a descriptive name for the
— Select Wireless
— To enter the service set
Enter manually. To select the
and
Connection
> >
to create a new
to use
LAN.
Search for
99