Nokia 002C9N1 User Manual page 129

Q: How do I switch WLAN off on my Nokia device?
A: The WLAN on your Nokia device switches off when you are
not trying to connect, not connected to another access point,
or not scanning for available networks. To further reduce
battery consumption, you can specify that your Nokia device
does not scan, or scans less often, for available networks in
the background. WLAN switches off in between background
scans.
To stop the background scans, select
Settings Connection
>
availability > Never. You can still manually scan for
available WLAN networks and connect to WLAN networks as
usual.
To increase the background scan interval, select
availability > Yes, and define the interval in
networks.
Q: Why can't I browse the web even though the
WLAN connection is working and the IP settings
are correct?
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your WLAN
access point.
Q: How do I check the signal quality of my WLAN
connection?
Select Menu Connectivity
>
connections Options
>
weak or moderate, you may encounter connection problems.
Try again closer to the access point.
© 2007 Nokia. All rights reserved.
Menu Tools
>
Wireless LAN Show WLAN
> >
Show WLAN
Scan for
Conn. mgr. Active data
> >
> Details. If the signal quality is
Q: Why do I have problems with the security
mode?
A: Check that you have configured the security mode
correctly, and that it is the same that the network uses. To
check the security mode the network uses, select
Connectivity
Options > Details.
Check also the following: you have the correct WPA mode
(preshared key or EAP), you have disabled all EAP types that
>
are not needed, and all the EAP type settings are correct
(passwords, user names, certificates).
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number, an
address, or an e-mail address. Select
edit the contact card.
Q: The note Retrieving message is shown briefly.
What is happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging centre. This note is shown if you
have set Multimedia retrieval
multimedia message settings. Check that the settings for
multimedia messaging are defined correctly and that there
are no mistakes in phone numbers or addresses.
"Multimedia message settings", p. 60.
Q: How can I end the data connection when the
device starts a data connection again and again?
A: The device may be trying to retrieve a multimedia message
from the multimedia message centre. To stop the device from
making a data connection, select
Conn. mgr. Active data connections
> >
Menu
to Always automatic
Menu
Menu
>
>
> Contacts, and
in the
See
Messaging
> >
129