Table of Contents
Advertisement
4.
Telephone
Answer a call
Note: The actual invoice for calls and services from your service provider may vary, depending on network features,
rounding off for billing, taxes, and so forth.
To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be
located in a service area of the cellular network.
To answer a call, press the call key.
To reject the call, press the end key.
To mute the ringing tone instead of answering a call, select Silence.
When you have an active call and the call waiting function is activated, press the call key to answer a new incoming call. The
first call is put on hold. To end the active call, press the end key.
Make a call
Important: If the device has been locked, enter the lock code to activate the phone function. When the device is locked,
calls may be possible to the official emergency number. Making an emergency call in the offline profile or when the
device is locked requires that the device recognize the number to be an official emergency number. It is advisable to
change the profile or unlock the device by entering the lock code before you make the emergency call.
To make a call, enter the phone number, including the area code, and press the call key.
Tip: For international calls, add the + character that replaces the international access code, and enter the country code,
area code (omit the leading 0, if necessary), and phone number.
To end the call or cancel the call attempt, press the end key.
To make a call using the saved contacts, select
name, and press the call key.
To make a call using the log, press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the
desired number or name, and press the call key.
To adjust the volume of an active call, scroll right or left.
To switch from a voice call to a video call, select
call to the recipient.
Make a conference call
1. To make a conference call, enter a participant's phone number, and press the call key.
2. When the participant answers, select
3. When you have made a phone call to all the participants, select
call.
To mute the microphone of your device during the call, select
To drop a participant from the conference call, scroll to the participant, and select
To discuss privately with a conference call participant, scroll to the participant, and select
Video calls
To be able to make a video call, you need to be in the coverage of a UMTS network. For availability of and subscription to video
call services, contact your network operator or service provider. While talking, you can see a real-time, two-way video between
you and the recipient of the call, if the recipient has a compatible mobile phone. The video image captured by the camera in
your device is shown to the video call recipient. A video call can only be made between two parties.
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
To make a video call, enter the phone number or select the recipient of the call from Contacts, and select
Video
call. When the video call starts, the camera on the back of the device is activated, if you use the cover phone. If the
communicator is open, the camera on the communicator is activated. If the camera is already in use, video sending is disabled.
If the recipient of the call does not want to send a video back to you, a still image is shown instead. You can define the still
image in
Tools
Settings
>
>
© 2007 Nokia. All rights reserved.
Contacts
See "Contacts" on page 35.
See "Log" on page 25.
Options
Options
New
>
Phone
Call
Image in video
>
>
>
in the standby mode. Enter the first letters of the name, scroll to the
Switch to video
call. The device ends the voice call and makes a video
>
call.
Options
Conference
>
Options
> Mute.
call.
21
to merge the calls into a conference
Options
Conference
>
>
Options
Conference
>
Options
Drop
participant.
> Private.
Call
>
>
Advertisement
Table of Contents
