NEC VERSA DOCKING STATION 4000 Manual page 29

2. Set the NEC Versa on the docking station and align the
expansion port and connector.
Gently push against the front of the NEC Versa to put it
3.
in position to dock.
Keep the notebook computer aligned evenly with the
connector. Push either against the center of the computer
or push with equal pressure against the left front and
right front of the NEC Versa.
Keep the NEC Versa straight. If the computer
is pushed at an angle, it does not dock properly.
To prevent connector damage, the docking mecha-
nism will not start to dock if the expansion connec-
tors are not aligned properly. If this occurs, adjust
the NEC Versa position by lifting the front of the
computer or shifting it left or right.
Docking the NEC Versa
Docking/Undocking the NEC Versa 2-7